Loading content...
Service Category
Repair
Euroturbine gas turbine repair: blade tip restore, crack weld/braze, coating strip/recoating, NDT, re-blading and balancing — extend HGP life at lower cost than new parts.
2 min read
Engineering & Aftermarket
Gas Turbine Component Repair
14
Scope
05
Why Repair with Euroturbine?
Euroturbine repairs and reconditions gas turbine components to return them to serviceable condition under controlled workscopes. Typical work includes cleaning, dimensional inspection, NDT, crack repair (weld/braze), tip restoration, coating strip and recoat, bearing surface refurbishment, turbine/compressor re-blading and dynamic balancing — aimed at extending remaining life and avoiding premature scrap of expensive HGP hardware.
Repair & Reconditioning Scope
- Cleaning of components
- Precision assembling and disassembling
- Dimensional and run-out measurements
- Advanced NDT inspections
- Visual defect restoration
- Bearing surface refurbishment
- Protective and functional coating application
- Turbine and compressor re-blading
- Dynamic balancing of components and assemblies
Advanced NDT Inspection Capabilities
| Benefit / Item | Description / Impact |
|---|---|
| Metallurgical Evaluation | Material condition assessment |
| MPI / FPI (Penetrant Inspection) | Surface crack detection |
| Eddy Current Inspection | Near-surface flaw detection |
| Ultrasonic Inspection | Internal defect identification |
Rotor Lifetime Analysis
- Metallurgical analysis, Fatigue & fracture evaluation, Creep assessment. This analytical approach helps operators: Predict remaining useful life; Plan outages more effectively; Avoid catastrophic failures; Optimize asset management.
Why Repair with Euroturbine?
- 01Documented repair limits and inspection criteria before work starts
- 02NDT + metallurgical input when damage mechanism is unclear
- 03Can combine repair with rejuvenation (HIP) and re-coating
- 04Cost and lead-time advantage versus OEM replacement
- 05Suitable for blades, vanes, combustion hardware and rotating parts
Explore other services
Rejuvenation
Extend the life of your OEM gas turbine blades with Euroturbine’s Full-Service Rejuvenation Process, saving costs, boosting efficiency, reducing waste, and achieving long-term performance beyond OEM standards.
Root Cause Failure Analysis (RCFA)
"Euroturbine’s Root Cause Failure Analysis (RCFA) identifies and resolves gas turbine failures, improving reliability, reducing downtime, and lowering maintenance costs."
Re-Engineering
Euroturbine reverse / re-engineering for gas turbine parts: 3D scan, CAD modeling, drawing pack and manufacturable geometry when OEM data is unavailable.